Tape shrink packaging machine tape envelope sealing tape shrink film machine automatic machine Product Name: Tape shrink packaging machine Model: BTL-450A BM-500 tape shrink packaging machine Description: This machine adopts anti-stick, high temperature, thermostat super fine aluminum seal cutter, electrical uses computer (PLC) control, human-machine interface operation. Temperature and adjust the bag length high precision and smooth and reliable operation. Tape shrink packaging machine Uses: Suitable for high-volume electronics, metal, plastic, software, food, printing, pharmaceutical and flooring, ceramic and other industries shrink wrapping main parameters: Model: BTL-450A maximum packing size: (L + H) ≤500mm (W + H) ≤400mm (H) ≤200mm maximum seal size: (L) 550 × (W) 450mm Packing speed: 800 ~ 1200 / hour power and total power: 220V / 50Hz 1.2kw use gas source: 6kg / cm3 Weight: 125kg / 135kg Overall dimensions: (L) 1550 × (W) 750 × (H) 1050mm Model: BM-500 maximum packing size: (L) 700 × (W) 450 × (H) 250mm Maximum seal size: (L) 1200 × (W) 500 × (H) 300mm (cavity size) Packing speed: 30 to 50 packs / min power and total power: 380V / 50Hz 12kw using gas source: / Weight: 220kg Overall dimensions: (L) 1350 × (W) 750 × (H) 1500mm Features: 1. Anti-stick high temperature alloy "L" type sealing knife, sealing neat cracking, coking, do not smoke 2. plated special Teflon non-stick layer, without mucosal 3. Product by sealing sealing sealing knife when cutting after cutting through the conveyor belt automatically delivered to the shrink tunnel, shrink packaging 4. hand shake wheel for easy adjustment conveyor height 5.BTL-450A with manual, automatic conversion function, can automatically when the set time automatically. Entire exercise done automatically by the cylinder, greatly reducing the intensity of work and increase productivity. 6. Double solenoid pull sealing and cutting the frame to increase the sealing pressure 7. sliding film holder can be placed on a variety of shrink film (a maximum width of 550mm), 8. Anti-smooth sealing knife punching device overheating protection apparatus Customer Case: Shrinking Machine Handling Precautions: 1. When users need to use shrink packaging machine 380V power supply, three-phase four-wire, four-legged plug, power cord greater than 6mm2 cross-section where the zero line must be connected to the machine, otherwise the machine can not be shipped. do. (Note that the zero line must be connected) as the machine is 220V power supply, three-pin plug, power cord cross section is greater than 4mm2, the cabinet must be grounded in order to start operation. 2. Heat the upper and lower chambers, up and down a set of indoor heating pipes fixed opening, another group of adjustable temperature heating pipe. 3. shrink packaging machine shrink room temperature should be controlled at 230 ℃ (6-7 range) or less, conveyor speed control at 6-7 stalls below, if over-temperature, speed run, will lead to premature aging of the circuit, the electrical component life, machines life will be reduced. 4. The bottom of the shrink packaging machine should maintain good ventilation, cooling conditions, to prevent overheating of electrical components. 5. shrink packaging machine for three months or more, check shrink indoor wire aging, as appropriate replacement. 6. Packing material passes through the studio, try to put in the middle, so as not to damage the quartz tube. Shrink Machine -http: //www.tyxunjie.com/ tape Automatic shrink machine -http: //www.tyxunjie.com/p1/233.html Automatic shrink machine -http: //www.tyxunjie.com/p1 / filling machine for the enterprise should the interested and want to know more products, solve mind questions for this product, then call our hotline, we will have professionals to answer your questions: Mobile: 18678886251 QQ: 2880668773 E-mail: 2880668773@qq.com Fax: 0531-66590961 Website: http: //www.tyxunjie.com Address: Jinan City Port Economic Development Zone, 3843 Airport Road